Flow Channel with Wrinkles and Calcium Sites in a Ca-MOF for Direct One-Step Ethylene Purification from C2 Gases and MTO Products Separation.

The strategy of flow channel with wrinkles and calcium sites for single-step C2H4 purification from C2 gases and methanol-to-olefins (MTO) products separation was realized in FJI-Y9. The adsorption amounts showed a total reversal order of C3H6 > C2H6 > C2H2 > C2H4 at 298 K. Modeling indicated that the wrinkles and Ca2+ facilitated the full contact of C3H6 and C2H6. Breakthrough experiments illustrated that FJI-Y9 could yield pure C2H4 in a single step with a productivity of 0.78 mmol g-1. In a lone adsorption/desorption cycle for MTO product separation, the productivities of C3H6 and C2H4 were 1.96 and 1.29 mol g-1, standing as the highest recorded values.

Intracellular Staphylococcus aureus infection in human osteoblasts: circRNA expression analysis.

Staphylococcus aureus (S. aureus) has the ability to invade human cortical bones and cause intracellular infections in osteoblasts, which may lead to a long-term infection that is difficult to eliminate. It is critical to identify the underlying mechanisms of the osteoblast response to the intracellular S. aureus. More recently, multiple circular RNA (circRNA) functions have been identified, including serving as protein scaffolds or miRNA sponges and being translated into polypeptides. The role that circRNAs play in intracellular S. aureus infection of osteoblasts has not, to our knowledge, been investigated. Here, we established an intracellular infection model of S. aureus in osteoblasts and compared the circRNA expression of osteoblasts between the infected and control groups using RNA sequencing technology, by which a significant difference was found. In total, 117 upregulated and 125 down-regulated differentially expressed circRNAs (DEcircRNAs) were identified, and reverse transcription-quantitative PCR was employed to validate the results of RNA sequencing. Gene Ontology and Kyoto Encyclopedia of Genes and Genomes pathway analyses demonstrated that DEcircRNAs were enriched in processes associated with macromolecule modification, cellular component organization or biogenesis, and intracellular non-membrane-bound organelles. Finally, a potentially important network of circRNA-miRNA-mRNA based on the DEcircRNAs was constructed. Overall, this study revealed the circRNA expression profile of human osteoblasts infected by intracellular S. aureus for the first time, and identified the circRNAs that may contribute to the pathogenesis of infectious diseases caused by intracellular S. aureus infection in human osteoblasts.

Record High Iodate Anion Capture by a Redox-Active Cationic Polymer Network.

As a critical radioactive anionic contaminant, traditional adsorbents primarily remove iodate (IO3-) through ion exchange or hard acid-hard base interactions, but suffer from limited affinity and capacity. Herein, employing the synergistic effect of ion exchange and redox, we successfully synthesized a redox-active cationic polymer network (SCU-CPN-6, [C9H10O2N5•Cl]n) by merging guanidino groups with ion-exchange capability and phenolic groups with redox ability via a Schiff base reaction. SCU-CPN-6 exhibits a groundbreaking adsorption capacity of 896 mg/g for IO3-. The inferior adsorption capacities of polymeric networks containing only redox (~0 mg/g) or ion exchange (232 mg/g) fragments underscore the synergistic "1 + 1 > 2" effect of the two mechanisms. Besides, SCU-CPN-6 shows excellent uptake selectivity for IO3- in the presence of high concentrations of SO42-, Cl-, and NO3-. Meanwhile, a high distribution coefficient indicates its exemplary deep-removal performance for low IO3- concentration. The synergic strategy not only presents a breakthrough solution for the efficient removal of IO3- but also establishes a promising avenue for the design of advanced adsorbents for diverse applications.

Radiation-Assisted Assembly of a Highly Dispersed Nanomolybdenum-Functionalized Covalent Organic Framework.

Two-dimensional covalent organic frameworks (2D COFs), featuring a large surface area and 1D pore structure, serve as promising scaffolds for anchoring functional guest compounds, which can significantly enhance their performance and thus expand their potential applications. Postsynthetic strategy for COFs functionalization is versatile but challenging because of their tedious procedure with high time and energy consumption, generation of excess reaction waste, and damage to COF crystallinity. We report in this work a general strategy for the synthesis of inorganic nanocompound-functionalized COF composites in a one-pot way. Specifically, a high-crystallinity nanoscale molybdenum compound is successfully introduced into a COF skeleton with high dispersion in situ during the crystallization process of the COF induced by gamma ray radiation under ambient conditions. The obtained COF@Mo composites exhibit remarkable sorption performance for methylene blue and many other organic dyes in aqueous solution with the advantages of ultrarapid uptake dynamics and high removal efficiency.

A MOF@Metal Oxide Heterostructure Induced by Post-Synthetic Gamma-Ray Irradiation for Catalytic Reduction.

Metal-organic framework (MOF) based heterostructures, which exhibit enhanced or unexpected functionality and properties due to synergistic effects, are typically synthesized using post-synthetic strategies. However, several reported post-synthetic strategies remain unsatisfactory, considering issues such as damage to the crystallinity of MOFs, presence of impure phases, and high time and energy consumption. In this work, we demonstrate for the first time a novel route for constructing MOF based heterostructures using radiation-induced post-synthesis, highlighting the merits of convenience, ambient conditions, large-scale production, and notable time and energy saving. Specifically, a new HKUST-1@Cu2O heterostructure was successfully synthesized by simply irradiating a methanol solution dispersed of HKUST-1 with gamma ray under ambient conditions. The Copper source of Cu2O was directly derived from in situ radiation etching and reduction of the parent HKUST-1, without the use of any additional copper reagents. Significantly, the resulting HKUST-1@Cu2O heterostructure exhibits remarkable catalytic performance, with a catalytic rate constant nearly two orders of magnitude higher than that of the parent HKUST-1.

Combining cisplatin with Pinellia pedatisecta Schott lipid-soluble extract induces tumor immunogenic cell death in cervical cancer.

BACKGROUND: Pinellia pedatisecta Schott extract (PE) is extracted from Pinellia pedatisecta Schott (PPS), a traditional Chinese medicinal plant with the potential for direct anticancer effects or eliciting an anti-tumor response by activating the immune system. PURPOSE: To explore PE's ability and mechanism to reconstruct cisplatin's immunogenicity. METHODS: Cervical cancer cells were treated with cisplatin (CDDP) and/or PE. The exposure of calreticulin (CRT) on cell membrane was investigated by flow cytometry. The extracellular of ATP and HMGB1 was investigated by Western blot analysis, immunofluorescence and ELISA assay. Changes in immune profiles were using flow cytometry in vaccination and anti-tumor assays in vivo. Lastly, the mechanism of PE influenced the ROS/ERS pathway was examined by ROS assay kit, flow cytometry and Western blotting. RESULTS: PE treatment induced translocation of CRT from the endoplasmic reticulum to the cell membrane of tumor cells, concomitantly triggering immunogenic cell death (ICD). In terms of mechanisms, endoplasmic reticulum (ER) stress relievers could impede the ability of PE to induce immunogenicity. This indicates that PE is activated by ER stress, leading to subsequent induction of ICD. Upon analyzing RNA-seq data, it was observed that PE primarily induces programmed cell death in tumors by impeding upstream antioxidant mechanisms. Additionally, it transforms dying tumor cells into vaccines, activating a series of immune responses. CONCLUSIONS: This study observed for the first time that PE-induced CRT exposure on the membrane of cervical cancer cells compensates for the defect of nonimmunogenic cell death inducer CDDP thereby stimulating potent ICD. This ability restores the immunogenicity of CDDP through ER stress induced by the ROS signal. ROS played a role in PE's ability to induce ICD, leading to increased expression of ER stress-related proteins, including ATF3 and IRE-1α. PE exerted anti-cancer effects by increasing the ROS levels, and ROS/ERS signaling may be a potential avenue for cervical cancer treatment. Hence, the synergistic use of PE and CDDP holds potential for enhancing immunochemotherapy in cancer treatment.

Bergamot essential oil improves CUMS-induced depression-like behaviour in rats by protecting the plasticity of hippocampal neurons.

Bergamot essential oil (BEO) is an extract of the bergamot fruit with significant neuroprotective effect. This study was to investigate the effects and the underlying mechanism of BEO in mitigating depression. GC-MS were used to identify its constituents. Antidepressive properties of BEO were evaluated by sucrose preference test (SPT), force swimming test (FST) and open field test (OFT). Nissl staining was used to determine the number of Nissl bodies in hippocampus (HIPP) of rats. Changes in HIPP dendritic length and dendritic spine density were detected by Golgi-Cox staining. Immunohistochemistry and Western blot were used to detect the postsynaptic density protein-95 (PSD-95) and synaptophysin (SYP) in the HIPP of rats. The enzyme-linked immunosorbent assay was used to determine the 5-hydroxytryptamine (5-HT), insulin-like growth factor 1 (IGF-1) and interleukin-1ß (IL-1ß) in the HIPP, serum and cerebrospinal fluid (CSF) of rats. Inhaled BEO significantly improved depressive behaviour in chronic unpredictable mild stress (CUMS) rats. BEO increased Nissl bodies, dendritic length and spine density, PSD-95 and SYP protein in the HIPP. Additionally, BEO upregulated serum 5-HT, serum and CSF IGF-1, while downregulating serum IL-1ß. Collectively, inhaled BEO mitigates depression by protecting the plasticity of hippocampal neurons, hence, providing novel insights into treatment of depression.

Aneuploid serves as a prognostic marker and favors immunosuppressive microenvironment in ovarian cancer.

Ovarian cancer is the most lethal gynecologic neoplasm, and most patients experience recurrence and chemoresistance. Even the promising immunotherapy showed limited efficacy in ovarian cancer, probably due to the immunosuppressive microenvironment. However, the behind mechanisms of the immune exclusion or cold phenotype in ovarian cancer still remain to be explored. As a cancer dominated by copy number variations instead of mutations, ovarian cancer contains a high fraction of aneuploid, which might correlate with immune inhibition. Nevertheless, whether or how aneuploid affects ovarian cancer is still unclear. For exploring the role of aneuploid cancer cells and the potential ploidy-immune relationship, herein, the ploidy information was first comprehensively analyzed combining the karyotype data and copy number variation data obtained from Mitelman and cBioPortal databases, respectively. Ovarian cancer showed strong ploidy heterogeneity, with high fraction of aneuploid and recurrent arm-level and whole chromosome changes. Furthermore, clinical parameters were compared between the highly-aneuploid and the near-diploid ovarian cancers. Aneuploid indicated high grade, poor overall survival and poor disease-free survival in ovarian cancer. To understand the biofunction affected by aneuploid, the differentially expressed genes between the highly-aneuploid and the near-diploid groups were analyzed. Transcription data suggested that aneuploid cancer correlated with deregulated MHC expression, abnormal antigen presentation, and less infiltration of macrophages and activated T cells and higher level of T cell exclusion. Furthermore, the ploidy-MHC association was verified using the Human Protein Atlas database. All these data supported that aneuploid might be promising for cancer management and immune surveillance in ovarian cancer.

Manufacturing of high strength and high conductivity copper with laser powder bed fusion.

Additive manufacturing (AM), known as 3D printing, enables rapid fabrication of geometrically complex copper (Cu) components for electrical conduction and heat management applications. However, pure Cu or Cu alloys produced by 3D printing often suffer from either low strength or low conductivity at room and elevated temperatures. Here, we demonstrate a design strategy for 3D printing of high strength, high conductivity Cu by uniformly dispersing a minor portion of lanthanum hexaboride (LaB6) nanoparticles in pure Cu through laser powder bed fusion (L-PBF). We show that trace additions of LaB6 to pure Cu results in an improved L-PBF processability, an enhanced strength, an improved thermal stability, all whilst maintaining a high conductivity. The presented strategy could expand the applicability of 3D printed Cu components to more demanding conditions where high strength, high conductivity and thermal stability are required.

Different responses of marine microalgae Phaeodactylum tricornutum upon exposures to WAF and CEWAF of crude oil: A case study coupled with stable isotopic signatures.

Increasing use of chemical dispersants for oil spills highlights the need to understand their adverse effects on marine microalgae and nutrient assimilation because the toxic components of crude oil can be more bioavailable. We employed the crude oil water-accommodated fraction (WAF) and chemically enhanced WAF (CEWAF) to compare different responses in marine microalgae (Phaeodactylum tricornutum) coupled with stable isotopic signatures. The concentration and proportion of high-molecular-weight polycyclic aromatic hydrocarbons (HMW PAHs), which are key toxic components in crude oil, increased after dispersant addition. CEWAF exposure caused higher percent growth inhibition and a lower chlorophyll-a level of microalgae than those after WAF exposure. Compared with WAF exposure, CEWAF led to an enhancement in the self-defense mechanism of P. tricornutum, accompanied by an increased content of extracellular polymeric substances. 13C-depletion and carbon assimilation were altered in P. tricornutum, suggesting more HMW PAHs could be utilized as carbon sources by microalgae under CEWAF. CEWAF had no significant effects on the isotopic fractionation or assimilation of nitrogen in P. tricornutum. Our study unveiled the impact on the growth, physiological response, and nutrient assimilation of microalgae upon WAF and CEWAF exposures. Our data provide new insights into the ecological effects of dispersant applications for coastal oil spills.

Tuning Multiple Counter-Anions in Porous Coordination Polymers with lcy Topology for Acetylene/Ethylene Separation.

The efficient separation of acetylene (C2H2) and ethylene (C2H4) is an important and complex process in the industry. Herein, we report a new family of lcy-topologic coordination frameworks (termed NTU-90 to NTU-92) with Cu3MF6 (M = Si, Ti, and Zr) nodes. These charged frameworks are compensated by different counterbalanced ions (MF62-, BF4-, and Cl-), yielding changes in the size of the window apertures. Among these frameworks, NTU-92-a (activated NTU-92) shows good adsorption selectivity of C2H2/C2H4 and also significant ability in recovering both highly pure C2H4 (99.95%) and C2H2 (99.98%). Our work not only presents a potential alternative for energy-saving purification of C2 hydrocarbons but also provides a new approach for tuning the function of charged porous materials.

Flow Channel with Recognition Corners in a Stable La-MOF for One-Step Ethylene Production.

Single-step ethylene (C2H4) production from acetylene (C2H2), ethylene (C2H4), and ethane (C2H6) mixtures was realized via the strategy of a flow channel with recognition corners in MOF NTUniv-64. Both the uptake amounts and the enthalpy of adsorption (Qst) showed the same order of C2H2 > C2H6 > C2H4. Breakthrough testing also verified the above data and the C2H4 purification ability. Grand Canonical Monte Carlo (GCMC) simulations indicated that uneven corners could precisely detain C2H2 and C2H6, in which the C-H···π interaction distance between C2H2 (2.84 Å) and C2H6 (3.03 Å) and the framework was shorter than that of C2H4 (3.85 Å).

Accelerated corrosion of 316L stainless steel in a simulated oral environment via extracellular electron transfer and acid metabolites of subgingival microbiota.

316L stainless steel (SS) is widely applied as microimplant anchorage (MIA) due to its excellent mechanical properties. However, the risk that the oral microorganisms can corrode 316L SS is fully neglected. Microbiologically influenced corrosion (MIC) of 316L SS is essential to the health and safety of all patients because the accelerated corrosion caused by the oral microbiota can trigger the release of Cr and Ni ions. This study investigated the corrosion behavior and mechanism of subgingival microbiota on 316L SS by 16S rRNA and metagenome sequencing, electrochemical measurements, and surface characterization techniques. Multispecies biofilms were formed by the oral subgingival microbiota in the simulated oral anaerobic environment on 316L SS surfaces, significantly accelerating the corrosion in the form of pitting. The microbiota samples collected from the subjects differed in biofilm compositions, corrosion behaviors, and mechanisms. The oral subgingival microbiota contributed to the accelerated corrosion of 316L SS via acidic metabolites and extracellular electron transfer. Our findings provide a new insight into the underlying mechanisms of oral microbial corrosion and guide the design of oral microbial corrosion-resistant materials.

Pro-inflammatory cytokines in stress-induced depression: Novel insights into mechanisms and promising therapeutic strategies.

Stress-mediated depression is one of the common psychiatric disorders with a high prevalence and suicide rate, there is a lack of effective treatment. Accordingly, effective treatments with few adverse effects are urgently needed. Pro-inflammatory cytokines (PICs) may play a key role in stress-mediated depression. Thereupon, both preclinical and clinical studies have found higher levels of IL-1ß, TNF-α and IL-6 in peripheral blood and brain tissue of patients with depression. Recent studies have found PICs cause depression by affecting neuroinflammation, monoamine neurotransmitters, hypothalamic pituitary adrenal axis and neuroplasticity. Moreover, they play an important role in the symptom, development and progression of depression, maybe a potential diagnostic and therapeutic marker of depression. In addition, well-established antidepressant therapies have some relief on high levels of PICs. Importantly, anti-inflammatory drugs relieve depressive symptoms by reducing levels of PICs. Collectively, reducing PICs may represent a promising therapeutic strategy for depression.

Metallaaromatic Complexes as Candidates for Future Molecular Materials and Electronic Devices: Recent Advancements.

In recent years, the field of organometallic chemistry has made a great progress and diverse types of metallaaromatics have successively been reported. In those studies, incorporation of ligated osmium centers into metallaaromatic systems played a prominent role. The reviewed literature documents that certain metallaaromatics with unconventional photophysical properties, redox and electronic transport properties and magnetism, have potential to be widely used in diverse practical applications, with selected examples of amino acid and fluoride anion identification, photothermal effects, functional materials, photodynamic therapy (PDT) in biomedicine, single-molecule junction conductors, and electron-transport layer materials (ETLs) in solar cells.

Revealing the clinical effect and biological mechanism of acupuncture in COPD: A review.

BACKGROUND: To provide new ideas for the clinical and mechanism research of acupuncture in the treatment of chronic obstructive pulmonary disease (COPD), this study systematically reviews clinical research and the progress of basic research of acupuncture in the treatment of COPD. METHODS: PubMed and Web of Science databases were searched using acupuncture and COPD as keywords in the last 10 years, and the included literature was determined according to exclusion criteria. FINDINGS: Acupuncture can relieve clinical symptoms, improve exercise tolerance, anxiety, and nutritional status, as well as hemorheological changes (blood viscosity), reduce the inflammatory response, and reduce the duration and frequency of COPD in patients with COPD. Mechanistically, acupuncture inhibits M1 macrophage activity, reduces neutrophil infiltration, reduces inflammatory factor production in alveolar type II epithelial cells, inhibits mucus hypersecretion of airway epithelial cells, inhibits the development of chronic inflammation in COPD, and slows tissue structure destruction. Acupuncture may control pulmonary COPD inflammation through the vagal-cholinergic anti-inflammatory, vagal-adrenomedullary-dopamine, vagal-dual-sensory nerve fiber-pulmonary, and CNS-hypothalamus-orexin pathways. Furthermore, acupuncture can increase endogenous cortisol levels by inhibiting the HPA axis, thus improving airway antioxidant capacity and reducing airway inflammation in COPD. In conclusion, the inhibition of the chronic inflammatory response is the key mechanism of acupuncture treatment for COPD.

Fine Tuning Metal-Organic Frameworks with Halogen Functional Groups for Ethylene Purification.

One-step C2H4 purification from a mixture of C2H2/C2H4/C2H6 could be achieved by metal-organic framework (MOF) NTUniv-70 with an F-functional group. The selectivities of C2H4/C2H6 and C2H4/C2H2 of NTUnvi-70 based on ideal adsorbed solution theory were at least twice that of the original MOF platform, which was in line with the enthalpy of adsorption (Qst) and breakthrough testing. Grand canonical Monte Carlo simulations indicated that the C-H···F interactions played an important role in enhanced C2H4/C2H6 and C2H4/C2H2 adsorption selectivities.

A follicle-stimulating hormone receptor-targeted near-infrared fluorescent probe for tumor-selective imaging and photothermal therapy.

Late detection, peritoneal dissemination, chemoresistance and weak response to targeted therapeutics lead to high mortality in ovarian cancer. More efficient and specific tumor imaging and therapeutic agents are needed to improve the resection rate of surgery and to eliminate residual disease. The expression patterns of follicle-stimulating hormone (FSH) receptor make it a suitable target for ovarian cancer. Here, we report a strategy to develop an organic near-infrared probe for FSH receptor-targeted tumor imaging and photothermal therapy. The FSH-Rh760 probe was conjugated from the Rh760 fluorophore with the FSH ß subunit 33-53 peptide. FSH-Rh760 specifically distinguished peritoneal metastatic ovarian cancerous foci from surrounding normal tissues with a high tumor-to-background ratio. The fluorescence signals in tumors peaked at 2 h and were cleared at 120 h postinjection. FSH-Rh760 treatment rapidly increased the abdomen temperature of mice up to ∼43 °C upon exposure to a near-infrared laser and effectively suppressed peritoneal tumor growth with tumor specificity. No significant systemic toxicities were observed. This study demonstrates the targeting ability and biocompatibility of FSH receptor-targeted theranostics and highlights its potential for clinical application in imaging-guided precision tumor resection and photothermal therapy to eliminate cancer lesions intraoperatively and postoperatively.

Targeted Imaging of Endometriosis and Image-Guided Resection of Lesions Using Gonadotropin-Releasing Hormone Analogue-Modified Indocyanine Green.

Objective: In this study, we utilized gonadotropin-releasing hormone analogue-modified indocyanine green (GnRHa-ICG) to improve the accuracy of intraoperative recognition and resection of endometriotic lesions. Methods: Gonadotropin-releasing hormone receptor (GnRHR) expression was detected in endometriosis tissues and cell lines via immunohistochemistry and western blotting. The in vitro binding capacities of GnRHa, GnRHa-ICG, and ICG were determined using fluorescence microscopy and flow cytometry. In vivo imaging was performed in mouse models of endometriosis using a near-infrared fluorescence (NIRF) imaging system and fluorescence navigation system. The ex vivo binding capacity was determined using confocal fluorescence microscopy. Results: GnRHa-ICG exhibited a significantly stronger binding capacity to endometriotic cells and tissues than ICG. In mice with endometriosis, GnRHa-ICG specifically imaged endometriotic tissues (EMTs) after intraperitoneal administration, whereas ICG exhibited signals in the intestine. GnRHa-ICG showed the highest fluorescence signals in the EMTs at 2 h and a good signal-to-noise ratio at 48 h postadministration. Compared with traditional surgery under white light, targeted NIRF imaging-guided surgery completely resected endometriotic lesions with a sensitivity of 97.3% and specificity of 77.8%. No obvious toxicity was observed in routine blood tests, serum biochemicals, or histopathology in mice. Conclusions: GnRHa-ICG specifically recognized and localized endometriotic lesions and guided complete resection of lesions with high accuracy.

[Application progress of on-line sample preparation techniques coupled with liquid chromatography-mass spectrometry system in the detection of food hazards].

Food safety has received increased attention, and food detection is of great significance. The food matrix is complex, and diverse food hazards have been identified. Thus, the detection methods and sample preparation techniques for food matrices must be continuously optimized and updated. Several steps are usually required when a chromatographic system is used to determine food hazards: sample preparation, that is, the separation of targets from different substrates using a suitable preprocessing method and target-substance separation and purification, which is usually achieved using chromatographic separation. The selection of an appropriate detector for qualitative and quantitative analyses is usually based on the properties of the target compound. The sample preparation procedure is considered the most time-consuming aspect of the entire food-analysis process. It is also prone to analytical errors. Therefore, optimization of the sample preparation process is a key issue in the field of chemical analysis. Researchers have developed a series of new, efficient, and accurate sample preprocessing methods, and an on-line sample-preparation system has been found to be a feasible approach. On-line sample preparation coupled with liquid chromatography-mass spectrometry (LC-MS) presents many advantages. First, manual operation could reduce analytical errors to ensure good accuracy and repeatability. It could also reduce the consumption of chemical reagents and avoid cross-contamination between samples. Furthermore, an on-line sample-preparation system could shorten the sample-preparation time and improve the detection efficiency. On-line sample preparation coupled with LC-MS has been widely applied in the fields of environment, biology, and food. On-line sample preparation systems coupled with LC-MS are divided into two modules: the first modules involves sample preparation and the second module involves the LC system. The first module remove impurities and isolates the target compounds in preparation for their qualitative and quantitative detection. The coupling of these two modules depends mainly on valve switching. In this paper, we introduce the most frequently used on-line sample-preparation techniques, including on-line solid phase extraction (on-line SPE), in-tube solid phase microextraction (in-tube SPME), and turbulent chromatography (TFC). We then describe the basic principles and coupling equipment of these three on-line analytical technologies in detail. The coupling equipment establishes a physical connection between the two modules. Next, we discuss the properties of different purification fillers in an on-line sample-preparation column. The applications and research progress of on-line systems for pesticide residues, veterinary drug residues, and biotoxins are also discussed. Compared with offline sample preparation, on-line analytical systems present several advantages. On-line analytical systems can not only greatly reduce the analysis time and solvent consumption but also improve the detection sensitivity and accuracy. Such systems can be used to determine food hazards to ensure food safety. Finally, the existing problems and development trends of on-line analytical systems are discussed and prospected. To promote the applications of on-line analytical technology in food-safety detection, we suggest that the following three aspects be considered. First, more on-line purification columns with novel fillers, in addition to C18 or polymer fillers, should be developed. Second, compared with ordinary detectors, high-resolution MS detectors have better precision and accuracy. Coupling on-line analytical technologies with a high-resolution mass spectrometer may be beneficial for the further development of on-line analyses. Third, different food matrices should be compared and evaluated to continuously optimize the detection process and improve the efficiency of on-line analytical systems. As concerns regarding food safety issues have increased, the applications of on-line analytical technologies for food detection can be expected to become increasingly important.